Determinação do período de estabilidade de soluções volumétricas rotineiramente utilizadas em laboratórios de análises químicas / Determination of the stability period of volumetric solutions routinely used in chemical analysis laboratories / Determinación del período de estabilidad de las soluciones volumétricas utilizadas habitualmente en los laboratorios de análisis químicos

As soluções volumétricas são rotineiramente utilizadas nos laboratórios, principalmente nos processos de síntese de produtos e nas análises quantitativas de matéria-prima e/ou produto acabado, entretanto poucos são os estudos que abordam a estabilidade destas soluções. Considerando que a qualidade das soluções volumétricas pode afetar os procedimentos de análises químicas e consequentemente induzir a erros, e ainda que, a Farmacopeia Brasileira (2010) não cita tempo máximo de utilização dessas soluções padronizadas, a avaliação da estabilidade das mesmas é importante. Sendo assim, o objetivo do trabalho foi avaliar a estabilidadede 10 soluções volumétricas, empregadas rotineiramente em laboratórios de análises químicas, com o intuito de estabelecer o período que essas soluções permanecem estáveis, isto é, sem sofrer alteração na concentração. As metodologias de preparo e padronização das soluções volumétricas seguiram os métodos descritos na Farmacopeia Brasileira (2010), sendo as mesmas padronizadas no momento do preparo e a cada 20 dias, por um período de 180 dias. As soluções contendo ácidos e bases, bem como as soluções de iodato de potássio e nitrato de prata, permaneceram constantes durante o período de análises. As soluções de EDTA, iodo, nitrito de sódio, permanganato de potássio e tiossulfato de sódio apresentaram estabilidade inferior a 180 dias, tornando necessária a realização de padronização periódica. As soluções volumétricas utilizadas nos laboratórios apresentam diferentes estabilidades, o que ressalta a importância da determinação do período que as mesmas se mantêmcom as concentrações estáveis, evitando possíveis alterações de resultados nas análises químicas.

Volumetric solutions are routinely used in laboratories, mainly in product synthesis processes and in quantitative analyzes of raw materials and/or finished products, however there are few studies that address the stability of these solutions. Considering that the quality of volumetric solutions can affect chemical analysis procedures and consequently induce errors, and even though the Brazilian Pharmacopoeia (2010) does not mention the maximum time for using these standardized solutions, the evaluation of their stability is important. Therefore, the aim of this work was to evaluate the stability of 10 volumetric solutions, routinely used in chemical analysis laboratories, in order to establish the period that these solutions remain stable without changing their concentrations. The methodologies for preparing and standardizing the volumetric solutions followed the methods described in the Brazilian Pharmacopoeia (2010), being standardized at the time of preparation and every 20 days, for a period of 180 days. Solutions containing acids and bases, as well as potassium iodate and silver nitrate solutions, were stable during the analysis period. The solutions of EDTA, iodine, sodium nitrite, potassium permanganate and sodium thiosulfate showed stability less than 180 days, making it necessary to carry out periodic standardization of these solutions. The volumetric solutions used in the laboratories have different stabilities, which highlights the importance of determining the period in which they remain stable, avoiding possible changes in results in chemical analyzes.

Las soluciones volumétricas se utilizan de forma rutinaria en los laboratorios, principalmente en los procesos de síntesis de productos y en el análisis cuantitativo de materias primas y/o productos acabados. Sin embargo, existen pocos estudios que aborden la estabilidad de estas soluciones. Considerando que la calidad de las soluciones volumétricas puede afectar los procedimientos de análisis químico y consecuentemente inducir a errores, y también que, la Farmacopea Brasileña (2010) no menciona el tiempo máximo de uso de estas soluciones estandarizadas, la evaluación de su estabilidad es importante. Así, el objetivo del trabajo fue evaluar la estabilidad de 10 soluciones volumétricas, utilizadas rutinariamente en los laboratorios de análisis químico, con el fin de establecer el período en que estas soluciones permanecen estables, es decir, sin sufrir alteraciones en la concentración. Las metodologías de preparación y estandarización de las soluciones volumétricas siguieron los métodos descritos en la Farmacopea Brasileña (2010), siendo las mismas estandarizadas en el momento de la preparación y cada 20 días, por un período de 180 días. Las soluciones que contienen ácidos y bases, así como las soluciones de yodato de potasio y nitrato de plata, permanecieron constantes durante el periodo de análisis. Las soluciones de EDTA, yodo, nitrito de sodio, permanganato de potasio y tiosulfato de sodio fueron estables durante menos de 180 días, por lo que fue necesario realizar estandarizaciones periódicas. Las soluciones volumétricas utilizadas en los laboratorios presentan diferentes estabilidades, lo que pone de manifiesto la importancia de determinar el periodo que permanecen con concentraciones estables, evitando posibles cambios en los resultados en los análisis químicos.

Laboratory chemical waste: hazard classification by GHS and transport risk.

OBJECTIVES: To identify and evaluate, based on the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) and the legislation of the Agência Nacional de Transportes Terrestres (ANTT - National Agency for Terrestrial Transport), the hazards arising from chemical waste generated in research laboratories in the health area. METHODS: Chemical residues generated in two medical research laboratories of the Faculdade de Medicina da Universidade de São Paulo were inventoried, from November 2017 to April 2019, and classified according to the GHS (hazard statements) and the ANTT transport legislation (risk classes), to determine the dangers coming from the respective substances and mixtures. RESULTS: In total, we identified 40 substances or mixtures with classification by the GHS indicating 36 hazard statements, 27 of which related to human health. According to the legislation established by ANTT, we found 16 cases of hazard associated with flammability, 15 cases related to toxicity and 12 cases related to corrosivity. CONCLUSIONS: Chemical residues generated in the laboratories studied are diversified in terms of their hazard characteristics, implying the possibility of exposure to severe risks to workers, students and the environment. The correct identification of these residues is a primary factor for reducing exposure to risks.

On-line solid-phase extraction of pharmaceutical compounds from wastewater treatment plant samples using restricted access media in column-switching liquid chromatography-tandem mass spectrometry.

An on-line solid phase extraction using a lab-made restricted access media (RAM) was developed as sample preparation procedure for determination of the pharmaceutical compounds caffeine (CAF), carbamazepine (CBZ), norfloxacin (NOR), ciprofloxacin (CIP), fluoxetine (FLX) and venlafaxine in wastewater treatment plant samples by liquid chromatography-tandem mass spectrometry (LC-MS/MS). This method is suitable for use in routine of analysis, avoiding cross-contamination and requiring only a small sample volume (50 µL), with minimal handling. The method was validated according to international guidelines. The chromatographic efficiency was evaluated using peak resolution and asymmetry parameters. Carryover was also evaluated, in order to ensure reliability of the analysis and the ability to reuse the cartridge. Satisfactory linearity (r2 > 0.99) was obtained for all the compounds. The intra- and inter-day precision values were lower than 5.79 and 14.1%, respectively. The limits of detection ranged from 0.01 to 3 µg L-1 and the limits of quantification were from 0.1 to 5 µg L-1. The method was applied to 20 environmental wastewater samples, with caffeine being the most widely detected compound, at the highest concentration of 392 µg L-1, while other compounds were detected in fewer samples at lower concentrations (up to 9.60 µg L-1). The lab-made modification is a cheaper option for on-line sample preparation, compared to commercially available on-line SPE cartridges and RAM columns. Moreover, a high-throughput procedure was achieved, with an analysis time of 16 min including sample preparation and chromatographic separation. The same RAM column was applied over 200 injections including method optimization, validation and application in wastewater samples without loss of analytical response.

Detection of SARS-CoV-2 by real-time PCR under challenging pre-analytical conditions reveals independence of swab media and cooling chain.

With global demand for SARS-CoV-2 testing ever rising, shortages in commercially available viral transport media pose a serious problem for laboratories and health care providers. For reliable diagnosis of SARS-CoV-2 and other respiratory viruses, executed by Real-time PCR, the quality of respiratory specimens, predominantly determined by transport and storage conditions, is crucial. Therefore, our aim was to explore the reliability of minimal transport media, comprising saline or the CDC recommended Viral Transport Media (HBSS VTM), for the diagnosis of SARS-CoV-2 and other respiratory viruses (influenza A, respiratory syncytial virus, adenovirus, rhinovirus and human metapneumovirus) compared to commercial products, such as the Universal Transport Media (UTM). We question the assumptions, that the choice of medium and temperature for storage and transport affect the accuracy of viral detection by RT-PCR. Both alternatives to the commercial transport medium (UTM), HBSS VTM or saline, allow adequate detection of SARS-CoV-2 and other respiratory viruses, regardless of storage temperatures up to 28 °C and storage times up to 28 days. Our study revealed the high resilience of SARS-CoV-2 and other respiratory viruses, enabling proper detection in clinical specimens even after long-time storage at high temperatures, independent of the transport medium's composition.

Laboratory chemical waste: hazard classification by GHS and transport risk / Resíduos químicos laboratoriais: classificação de perigo pelo GHS e risco no transporte

ABSTRACT OBJECTIVES: To identify and evaluate, based on the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) and the legislation of the Agência Nacional de Transportes Terrestres (ANTT - National Agency for Terrestrial Transport), the hazards arising from chemical waste generated in research laboratories in the health area. METHODS: Chemical residues generated in two medical research laboratories of the Faculdade de Medicina da Universidade de São Paulo were inventoried, from November 2017 to April 2019, and classified according to the GHS (hazard statements) and the ANTT transport legislation (risk classes), to determine the dangers coming from the respective substances and mixtures. RESULTS: In total, we identified 40 substances or mixtures with classification by the GHS indicating 36 hazard statements, 27 of which related to human health. According to the legislation established by ANTT, we found 16 cases of hazard associated with flammability, 15 cases related to toxicity and 12 cases related to corrosivity. CONCLUSIONS: Chemical residues generated in the laboratories studied are diversified in terms of their hazard characteristics, implying the possibility of exposure to severe risks to workers, students and the environment. The correct identification of these residues is a primary factor for reducing exposure to risks.

RESUMO OBJETIVOS: Identificar e avaliar, com base no Sistema Globalmente Harmonizado de Classificação e Rotulagem de Produtos Químicos (GHS) e na legislação da Agência Nacional de Transportes Terrestres (ANTT), os perigos provenientes dos resíduos químicos gerados em laboratórios de pesquisa na área de saúde. MÉTODOS: Resíduos químicos gerados em dois Laboratórios de Investigação Médica da Faculdade de Medicina da Universidade de São Paulo foram inventariados, no período de novembro de 2017 a abril de 2019, e classificados conforme o GHS (frases de perigo) e a legislação de transportes da ANTT (classes de risco), para determinação dos perigos provenientes das respectivas substâncias e misturas. RESULTADOS: No total, foram identificadas 40 substâncias ou misturas, cuja classificação pelo GHS indicou 36 frases de perigo, sendo 27 relacionadas à saúde humana. De acordo com a legislação estabelecida pela ANTT, foram encontrados 16 casos de periculosidade associada à inflamabilidade, 15 casos relacionados à toxicidade e 12 casos relativos à corrosividade. CONCLUSÕES: Resíduos químicos gerados nos laboratórios estudados são diversificados quanto a suas características de periculosidade, implicando a possibilidade de exposição a riscos severos aos trabalhadores, aos estudantes e ao ambiente. A correta identificação desses resíduos é fator primordial para diminuição da exposição aos riscos.

Large-Scale, In-House Production of Viral Transport Media To Support SARS-CoV-2 PCR Testing in a Multihospital Health Care Network during the COVID-19 Pandemic.

The COVID-19 pandemic has severely disrupted worldwide supplies of viral transport media (VTM) due to widespread demand for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) reverse transcription-PCR (RT-PCR) testing. In response to this ongoing shortage, we began production of VTM in-house in support of diagnostic testing in our hospital network. As our diagnostic laboratory was not equipped for reagent production, we took advantage of space and personnel that became available due to closure of the research division of our medical center. We utilized a formulation of VTM described by the CDC that was simple to produce, did not require filtration for sterilization, and used reagents that were available from commercial suppliers. Performance of VTM was evaluated by several quality assurance measures. Based on cycle threshold (CT ) values of spiking experiments, we found that our VTM supported highly consistent amplification of the SARS-CoV-2 target (coefficient of variation = 2.95%) using the Abbott RealTime SARS-CoV-2 Emergency Use Authorization (EUA) assay on the Abbott m2000 platform. VTM was also found to be compatible with multiple swab types and, based on accelerated stability studies, able to maintain functionality for at least 4 months at room temperature. We further discuss how we met logistical challenges associated with large-scale VTM production in a crisis setting, including use of a staged assembly line for VTM transport tube production.

An extension to: Systematic assessment of commercially available low-input miRNA library preparation kits.

High-throughput sequencing has emerged as the favoured method to study microRNA (miRNA) expression, but biases introduced during library preparation have been reported. We recently compared the performance (sensitivity, reliability, titration response and differential expression) of six commercially-available kits on synthetic miRNAs and human RNA, where library preparation was performed by the vendors. We hereby supplement this study with data from two further commonly used kits (NEBNext, NEXTflex) whose manufacturers initially declined to participate. NEXTflex demonstrated the highest sensitivity, which may reflect its use of partially-randomized adapter sequences, but overall performance was lower than the QIAseq and TailorMix kits. NEBNext showed intermediate performance. We reaffirm that biases are kit specific, complicating the comparison of miRNA datasets generated using different kits.

Inclusion of seasonal variation in river system microbial communities and phototroph activity increases environmental relevance of laboratory chemical persistence tests.

Regulatory tests assess crop protection product environmental fate and toxicity before approval for commercial use. Although globally applied laboratory tests can assess biodegradation, they lack environmental complexity. Microbial communities are subject to temporal and spatial variation, but there is little consideration of these microbial dynamics in the laboratory. Here, we investigated seasonal variation in the microbial composition of water and sediment from a UK river across a two-year time course and determined its effect on the outcome of water-sediment (OECD 308) and water-only (OECD 309) biodegradation tests, using the fungicide isopyrazam. These OECD tests are performed under dark conditions, so test systems incubated under non-UV light:dark cycles were also included to determine the impact on both inoculum characteristics and biodegradation. Isopyrazam degradation was faster when incubated under non-UV light at all collection times in water-sediment microcosms, suggesting that phototrophic communities can metabolise isopyrazam throughout the year. Degradation rate varied seasonally between inoculum collection times only in microcosms incubated in the light, but isopyrazam mineralisation to 14CO2 varied seasonally under both light and dark conditions, suggesting that heterotrophic communities may also play a role in degradation. Bacterial and phototroph communities varied across time, but there was no clear link between water or sediment microbial composition and variation in degradation rate. During the test period, inoculum microbial community composition changed, particularly in non-UV light incubated microcosms. Overall, we show that regulatory test outcome is not influenced by temporal variation in microbial community structure; however, biodegradation rates from higher tier studies with improved environmental realism, e.g. through addition of non-UV light, may be more variable. These data suggest that standardised OECD tests can provide a conservative estimate of pesticide persistence end points and that additional tests including non-UV light could help bridge the gap between standard tests and field studies.

Evaluation of Transport Media and Specimen Transport Conditions for the Detection of SARS-CoV-2 by Use of Real-Time Reverse Transcription-PCR.

The global coronavirus (CoV) disease 2019 (COVID-19) pandemic has resulted in a worldwide shortage of viral transport media and raised questions about specimen stability. The objective of this study was to determine the stability of severe acute respiratory syndrome CoV 2 (SARS-CoV-2) RNA in specimen transport media under various storage conditions. Transport media tested included UTM, UTM-RT, ESwab, M4, and saline (0.9% NaCl). Specimen types tested included nasopharyngeal/oropharyngeal swabs in the above-named transport media, bronchoalveolar lavage (BAL) fluid, and sputum. A high-titer SARS-CoV-2 remnant patient specimen was spiked into pooled SARS-CoV-2 RNA-negative specimen remnants for the various medium types. Aliquots of samples were stored at 18°C to 26°C, 2°C to 8°C, and -10°C to -30°C and then tested at time points up to 14 days. Specimens consistently yielded amplifiable RNA with mean cycle threshold differences of <3 over the various conditions assayed, thus supporting the use and transport of alternative collection media and specimen types under a variety of temperature storage conditions.

The Use of Chemical Compounds to Identify the Regulatory Mechanisms of Vertebrate Circadian Clocks.

Circadian clocks are intrinsic, time-tracking processes that confer a survival advantage on an organism. Under natural conditions, they follow approximately a 24-h day, modulated by environmental time cues, such as light, to maximize an organism's physiological efficiency. The exact timing of this rhythm is established by cell-autonomous oscillators called cellular clocks, which are controlled by transcription-translation negative feedback loops. Studies of cell-based systems and wholeanimal models have utilized a pharmacological approach in which chemical compounds are used to identify molecular mechanisms capable of establishing and maintaining cellular clocks, such as posttranslational modifications of cellular clock regulators, chromatin remodeling of cellular clock target genes' promoters, and stability control of cellular clock components. In addition, studies with chemical compounds have contributed to the characterization of light-signaling pathways and their impact on the cellular clock. Here, the use of chemical compounds to study the molecular, cellular, and behavioral aspects of the vertebrate circadian clock system is described.

Analytical tools for monitoring changes in physical and chemical properties of chromatography resin upon reuse.

Protein A resins are often reused for multiple cycles to improve process economy during mAb purification. Significant reduction in binding capacity and product recovery are typically observed due to the presence of unwanted materials (foulants) deposited on the resin upon reuse. In this paper, we have used a wide spectrum of qualitative and quantitative analytical tools (particle size analysis, HPLC, fluorescence, SEM, MS, and FTIR) to compare the strengths and shortcomings of different analytical tools in terms of their capability to detect the fouling of the resin and relate it to chromatographic cycle performance. While each tool offers an insight into this complex phenomena, fluorescence is the only one that can be used for real-time monitoring of resin fouling. A correlation could be established between fluorescence intensity and the process performance attributes (like yield or binding capacity) impacted upon resin reuse. This demonstration of the application of fluorescence for real-time monitoring correlated empirically with process performance attributes and the results support its use as a PAT tool as part of a process control strategy. While the focus of this paper is on fouling of protein A chromatography resin, the approach and strategy are pertinent to other modes of chromatography as well.

Expanding the applicability of the amino acid derivative reactivity assay: Determining a weight for preparation of test chemical solutions that yield a predictive capacity identical to the conventional method using molar concentration and demonstrating the capacity to detect sensitizers in liquid mixtures.

INTRODUCTION: The amino acid derivative reactivity assay (ADRA) is a novel in chemico alternative to animal testing for assessment of skin sensitization potential. The conventional ADRA protocol stipulates that test chemical solutions should be prepared to a specific molar concentration, allowing only for use of test chemicals with known molecular weights. Since many potential test substances are prepared by weight concentration or contain multiple unknown chemicals, this study was conducted to verify if it is possible to accurately assess the sensitization potential of test chemical solutions prepared at a specific weight concentration. METHODS: (1) Test chemical solutions for 82 chemicals were prepared at four different weight concentrations. Results were evaluated for agreement with in vivo results. (2) A liquid mixture comprising ten different non-sensitizers was prepared at 1 mg/mL. Ten different sensitizers of varying sensitization potencies were added individually to this mixture. The resulting pseudobinary mixtures were tested to confirm that the sensitizers could be detected. RESULTS: (1) The accuracies for test chemical solutions prepared at 0.5 and 0.2 mg/mL were 87.8% and 86.6%, respectively, which were roughly equivalent to the accuracy of 86.6% achieved with a solution prepared at the conventional molar concentration of 1 mM. In contrast, the accuracies for solutions prepared at 0.1 and 0.05 mg/mL were 82.9% and 74.4%, respectively, both of which were lower than that obtained with the conventional method. (2) Sensitizers added to the liquid mixture at 0.5 mg/mL were all correctly detected. DISCUSSION: Preparing test chemical solutions at a weight concentration of 0.5 mg/mL decreased false negatives and increased false positives while improving prediction accuracy, which suggests that the sensitization potential of mixtures can also be assessed with this method.

Provenance and risk in transfer of biological materials.

Whereas biological materials were once transferred freely, there has been a marked shift in the formalisation of exchanges involving these materials, primarily through the use of Material Transfer Agreements (MTAs). This paper considers how risk aversion dominates MTA negotiations and the impact it may have on scientific progress. Risk aversion is often based on unwarranted fears of incurring liability through the use of a material or loss of control or missing out on commercialisation opportunities. Evidence to date has suggested that complexity tends to permeate even straightforward transactions despite extensive efforts to implement simple, standard MTAs. We argue that in most cases, MTAs need do little more than establish provenance, and any attempt to extend MTAs beyond this simple function constitutes stifling behaviour. Drawing on available examples of favourable practice, we point to a number of strategies that may usefully be employed to reduce risk-averse tendencies, including the promotion of simplicity, education of those engaged in the MTA process, and achieving a cultural shift in the way in which technology transfer office (TTO) success is measured in institutions employing MTAs.

Chemometric approach to correlations between retention parameters of non-polar HPLC columns and physicochemical characteristics for ampholytic substances of biological and pharmaceutical relevance.

The correlations between the retention parameters of forty ampholytic, biologically active and/or pharmaceutically relevant substances (obtained for three non-polar HPLC columns at various compositions of mobile phases and pH conditions: 2.5, 7.0, 11.5) and their thirty-two physicochemical (calculated/spectral) characteristics were investigated by applying chemometric methods of analysis. In three cases (among seven cases considered), Quantitative Property-Retention Relation (QPRR) models meeting the predictive capability criteria were developed (the values of R2, Q2CV, Q2Ext were higher than 0.76, 0.66 and 0.67, respectively, while values of RMSEC, RMSECV and RMSEExt were lower than 0.51, 0.65 and 0.65 in each developed model). These models create a useful platform for predicting retention parameters of untested chemicals and, to some extent, gaining pharmaceutically valuable information on the biologically active ampholytic substances based on their properties and the conditions of chromatographic separation.

Lifetime and Aging of Chromatography Resins during Biopharmaceutical Manufacture.

Poor understanding of the events leading to chromatography column aging makes it difficult to monitor column lifetimes. The lack of established procedures in this area has made it difficult to establish industry standards. Therefore, it is important to understand resin aging mechanisms and techniques to monitor column aging during operation.

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.

This study investigates the efficiencies and mechanisms of the catalytic degradation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) first, in simulated laboratory conditions and then, in a commercial municipal solid waste incineration (MSWI) plant. Five commercially available V2O5-WO3/TiO2 (VWTi) catalysts were tested. The degradation efficiency of PCDD/Fs in the simulated flue gas ranged 22.8-91.7% and was generally higher than that in the MSWI flue gas of 8.0-85.4%. The degradation efficiency of PCDD/Fs in the real flue gas of the MSWI plant was largely hindered by the complex composition of the flue gas, which could not be completely reproduced in the simulated laboratory conditions. Furthermore, the degradation of the higher chlorinated PCDD/Fs was easier compared to the lower chlorinated ones in the presence of the VWTi catalysts, which was primarily driven by the tendency of the higher chlorinated PCDD/Fs to be adsorbed on the surface of the catalyst and further destructed due to their lower vapor pressure. In addition, powdered catalysts should be preferred over the honeycomb shaped ones as they exposed higher PCDD/Fs degradation efficiencies under equal reaction conditions. The chemical composition and a range of the relevant to the study properties of the catalysts, such as surface area, crystallinity, oxidation ability, and surface acidity, were analyzed. The study ultimately supports the identification of the preferred characteristics of the VWTi catalysts for the most efficient degradation of toxic PCDD/Fs and elucidates the corresponding deactivation reasons of the catalysts.

Biocompatible and label-free separation of cancer cells from cell culture lines from white blood cells in ferrofluids.

This paper reports a biocompatible and label-free cell separation method using ferrofluids that can separate a variety of low-concentration cancer cells from cell culture lines (∼100 cancer cells per mL) from undiluted white blood cells, with a throughput of 1.2 mL h-1 and an average separation efficiency of 82.2%. The separation is based on the size difference of the cancer cells and white blood cells, and is conducted in a custom-made biocompatible ferrofluid that retains not only excellent short-term viabilities but also normal proliferations of 7 commonly used cancer cell lines. A microfluidic device is designed and optimized specifically to shorten the time of live cells' exposure to ferrofluids from hours to seconds, by eliminating time-consuming off-chip sample preparation and extraction steps and integrating them on-chip to achieve a one-step process. As a proof-of-concept demonstration, a ferrofluid with 0.26% volume fraction was used in this microfluidic device to separate spiked cancer cells from cell lines at a concentration of ∼100 cells per mL from white blood cells with a throughput of 1.2 mL h-1. The separation efficiencies were 80 ± 3%, 81 ± 5%, 82 ± 5%, 82 ± 4%, and 86 ± 6% for A549 lung cancer, H1299 lung cancer, MCF-7 breast cancer, MDA-MB-231 breast cancer, and PC-3 prostate cancer cell lines, respectively. The separated cancer cells' purity was between 25.3% and 28.8%. In addition, the separated cancer cells from this strategy showed an average short-term viability of 94.4 ± 1.3%, and these separated cells were cultured and demonstrated normal proliferation to confluence even after the separation process. Owing to its excellent biocompatibility and label-free operation and its ability to recover low concentrations of cancer cells from white blood cells, this method could lead to a promising tool for rare cell separation.

Comparación de dos métodos de evaluación simplificada del riesgo químico por inhalación en un laboratorio universitario (COSHH Essentials y método basado en el INRS) / A comparison of two simplified methods of exposure risk assesment of inhalation of chemical agents: the COSHH essentials method and the INRS-based method

No disponible